ENGINEERING PLASTICS
High-performance semi-finished materials designed for demanding industrial applications, providing durability and precision.
Epoxy Glass Fiber FR4 (G10)
FR4/G10 epoxy glass sheet for electrical insulation, structural supports, fixtures and precision machined insulating components.
| Density | 1.80 - 1.90 g/cm³ |
| Operating Temp. | -40 / +140 °C |
| Hardness | 95-100 Shore D |
Phenolic Fiber (Textolite Sheet)
Phenolic fiber sheet for electrical insulation, wear plates, fixtures, gears and machine parts requiring stiffness and heat resistance.
| Density | 1.35 - 1.45 g/cm³ |
| Operating Temp. | -40 / +120 °C |
| Hardness | - |
Polyurethane (PU)
PU sheet, rod and custom cast parts for wheels, scrapers, buffers, seals and liners requiring abrasion resistance and elasticity.
| Density | 1.10 - 1.25 g/cm³ |
| Operating Temp. | -30 ile +80 °C |
| Hardness | - |
PET (Polyethylene Terephthalate / Arnite)
PET sheet and rod for precision slides, guides, rollers, food-industry machine parts and components requiring low moisture absorption.
| Density | 1.38 - 1.40 g/cm³ |
| Operating Temp. | -20 ile +100 °C |
| Hardness | - |
PEEK
PEEK sheet and rod for high-temperature, high-load and chemically demanding components in aerospace, energy, medical and machine applications.
| Density | 1.32 g/cm³ |
| Operating Temp. | -40 ile +250 °C |
| Hardness | - |
Carbon-Filled PTFE
Carbon-filled PTFE sheet and rod for piston rings, compressor parts, seals and sliding components with improved wear resistance.
| Density | 2.10 g/cm³ |
| Operating Temp. | -200 ile +260 °C |
| Hardness | - |
PTFE (Teflon)
Virgin PTFE sheet, rod and tube for seals, gaskets, slide bearings, electrical insulators and chemical-service parts.
| Density | 2.14 - 2.20 g/cm³ |
| Operating Temp. | -200 ile +260 °C |
| Hardness | - |
Cast Polyamide PA6 G/C
Cast PA6 G/C plate, rod and tube for large gears, rollers, pulleys, slide pads and wear parts under high load.
| Density | 1.15 g/cm³ |
| Operating Temp. | -40 ile +110 °C |
| Hardness | - |
Polyamide PA 6 (Nylon)
PA 6 sheet and rod for bushings, rollers, gears, wheels and machine parts requiring wear resistance, strength and vibration damping.
| Density | 1.14 - 1.15 g/cm³ |
| Operating Temp. | -40 ile +100 °C |
| Hardness | - |
Polypropylene (PP-H)
Lightweight PP-H sheet and rod for chemical tanks, ventilation ducts, plating lines and laboratory equipment with strong acid and alkali resistance.
| Density | 0.91 g/cm³ |
| Operating Temp. | 0 ile +100 °C |
| Hardness | - |
POM C (Acetal / Delrin)
Dimensionally stable POM C sheet and rod for gears, rollers, bushings, jigs and precision machined components with low friction.
| Density | 1.41 g/cm³ |
| Operating Temp. | -50 ile +100 °C |
| Hardness | - |
UHMWPE 1000 (PE1000)
Self-lubricating PE1000 sheet and rod for wear strips, conveyor guides, liners and low-friction parts in abrasive service.
| Density | 0.93 g/cm³ |
| Operating Temp. | -200 ile +80 °C |
| Hardness | - |
HDPE-300
Economical HDPE sheet and rod for chemical tanks, food-contact surfaces, drainage systems and welded equipment with low moisture absorption.
| Density | 0.95 g/cm³ |
| Operating Temp. | -50 +80 °C |
| Hardness | - |